Ring joint face weld flange-Wuxi Flange Forging

Home

Ring joint face weld flange

It is mainly engaged in the manufacturing, processing and research and development of flanges and petrochemical equipment accessories. It is one of the earliest and large-scale flange manufacturers and pressure vessel forging manufacturers in China.

Key words：

Flange Forging / Nuclear power products

Category：

Product Center

Tel：

+86-0510-85588035

Message

Product Description

　　Flange (Flange), also called flange flange disc or flange flange. Flange is a part of the interconnection between shaft and shaft, used for the connection between pipe ends; also used in the import and export of equipment on the flange, used for the connection between two devices, such as reducer flange. Flange connection or flange joint is a detachable connection consisting of flange, gasket and bolt interconnected as a group of combined sealing structure. The pipe flange refers to the flange used for piping in piping installations, and the flange used for equipment refers to the import and export flange of equipment. There are holes on the flange, and the bolts make the two flanges tightly connected. The flange is sealed with a gasket. Flange is divided into threaded connection (fillet connection) flange, welding flange and clamp flange. Flanges are used in pairs, low-pressure pipeline can use wire connection flange, four kilograms of pressure above the use of welding flange. Between the two flanges plus gasket, and then fastened with bolts. Different pressure flange thickness, they use different bolts. Pumps and valves, in connection with the pipeline, the localization of these equipment and equipment, also made corresponding flange shape, also known as flange connection. Where the two planes around the use of bolts to close the connection parts at the same time, generally known as "flange", such as the connection of ventilation ducts, this type of parts can be called "flange parts". But this connection is only a partial equipment, such as the flange and the connection of the pump, it is not good to call the pump "flange parts". Smaller ones, such as valves, can be called "flange class parts".

Classification method

　　1、According to the chemical industry (HG) industry standards: integral flange (IF), threaded flange (Th), plate flat welding flange (PL), necked butt welding flange (WN), necked flat welding flange (SO), socket welding flange (SW), butt welding ring loose flange (PJ/SE), flat welding ring loose flange (PJ/RJ), lined flange cover (BL(S)), flange cover (BL) [2] .

　　2, according to the petrochemical (SH) industry standards: threaded flange (PT), butt welding flange (WN), flat welding flange (SO), socket welding flange (SW), loose flange (LJ), flange cover (not table note).

　　3, according to the machinery (JB) industry standards: the whole flange, butt welding flange, plate flat welding flange, butt welding ring plate loose flange, flat welding ring plate loose flange, flanged ring plate loose flange, flange cover.

　　4, according to the national (GB) standard: the whole flange, threaded flange, butt welding flange, necked flat welding flange, necked socket welding flange, butt welding ring necked loose set flange, plate type flat welding flange, butt welding ring plate type loose set flange, flat welding ring plate type loose set flange, flanged ring plate type loose set flange, flange cover.

Material

　　WCB (carbon steel), LCB (low temperature carbon steel), LC3 (3.5% nickel steel), WC5 (1.25% chromium 0.5% molybdenum steel), WC9 (2.25% chromium), C5 (5% chromium 0.5% molybdenum), C12 (9% chromium 1% molybdenum), CA6NM (4 (12% chromium steel), CA15 (4) (12% chromium), CF8M (316 stainless steel), CF8C (347 stainless steel), CF8 (304 stainless steel), CF3 (304L stainless steel), CF3M (316L stainless steel), CN7M (alloy steel), M35-1 (Monel), N7M (Hastelloy B), CW6M (Hastelloy C), CY40 (Inconel), etc.

Technical parameters

GB9119，2-88
in	Nominal diameter	16kg = 1.6MPa
in	Nominal diameter	Flange outer diameter	Bolt hole distance	Bolt diameter	Number of bolt holes	Flange thickness
3/8	DN 10	90	60	14	4	14
1/2	DN 15	95	65	14	4	14
3/4	DN 20	105	75	14	4	16
1	DN 25	115	85	14	4	16
1 ^1/4	DN 32	140	100	18	4	18
1 ^1/2	DN 40	150	110	18	4	18
2	DN 50	165	125	18	4	20
2^1/2	DN 65	185	145	18	4	20
3	DN 80	200	160	18	8	20
3 ^1/2	DN 100	220	180	18	8	22
4	DN 125	250	210	18	8	22
5	DN 150	285	240	22	8	24
6	DN 200	340	295	22	8	26
8	DN 250	405	355	26	12	29
10	DN 300	460	410	26	12	32
12	DN 350	520	470	26	16	35
14	DN 400	580	525	30	16	38
16	DN 450	640	585	30	20	42
18	DN 500	715	650	33	20	46
20	DN 600	840	770	36	20	52